MODIFICATION PROCEDURES.

MWO 55-8115-202-40-1

11.

STANDARD FLAT HEAD

SCREWDRIVER

12.

SOCKETS AND DRIVE, OR

WRENCHES OF SIZES 7/16,

1/2, 9/16 AND 3/4.

13.

TONGUE AND GROOVE

PLIERS

14.

FORK LIFT CAPABLE OF

LIFTING 1140 POUND

GENERATOR

15.

WELDING ROD

16.

CENTER PUNCH

17.

DISPOSABLE PAINT

BRUSHES

18.

WHITE CHALK OR MARKER

FOR STEEL

19.

HAMMER

20.

LOCK WASHERS, 1/4"

NOMINAL

21.

LADDER / STEP AID

10. MODIFICATION PROCEDURES.

WARNING

Personal Protective Clothing and Individual Equipment (PPCIE) must be worn during

drilling or cutting. Industrial eye protection (i.e., glasses with side shields, goggles,

or face shield), hearing protection, and work gloves are required.

WARNING

PPCIE must be worn during grinding or buffing associated with CARC paint removal.

Industrial eye protection (i.e., glasses with side shields, goggles, or face shield),

hearing protection, work clothing, and gloves are required. Approved respiratory

protection (respirator and high efficiency particulate arresting (HEPA) cartridge), and

local exhaust ventilation with HEPA filter or HEPA vacuum must be used. DO NOT

DRY SWEEP OR USE COMPRESSED AIR.

WARNING

NEVER use a blowtorch or weld directly onto or near CARC paint finishes. Remove

CARC paint finish to bare metal (front and back) on all metal surfaces, 1" - 4"

adjacent to the area, to be blowtorch cut or welded. Thermal degradation of CARC

paint may generate potentially hazardous decomposition compounds or lead

and other heavy metal pigment fumes.

WARNING

PPCIE must be worn during mixing or brush application of CARC paint. Industrial

eye protection (i.e., glasses with side shields or goggles), work clothing, and gloves

are required. Approved respiratory protection (respirator and HEPA/organic

cartridge) must be worn.