INSTALLATION - TB-9-2320-279-13-10221

DRAFT

TB 9-2320-279-13-1

AC ALTERNATOR AND PULLEY REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

INSTALLATION

HEMAC003

1. Install key (27) and pulley (24) on shaft (26).

2. Clamp pulley (24) in vise with soft jaws.

3. Install locknut (25) on shaft (26) and tighten locknut (25) to 70-80 ft-lbs. (95-108 Nm).

HEMAC002

WARNING

Alternator is heavy. Do not install alternator on mounting bracket without the aid of

an assistant. Failure to comply may result in serious injury to personnel and/or

damage to equipment.

4. Soldier A supports alternator (20) while Soldier B installs alternator (20) on mounting bracket (23) with

screw (22) and locknut (21). Do not tighten locknut (21).

NOTE

Install washers as noted prior to removal.

5. Install alternator (20) on strap (19) with screw (18), washer (17), lockwasher (16), and locknut (15). Do

not tighten locknut (15).

0020-3