AC HEATER CONTROL PANEL LIGHTS DO NOT OPERATE - continued

DRAFT

TB 9-2320-364-13&P-1

AC HEATER CONTROL PANEL LIGHTS DO NOT OPERATE - Continued

WARNING

Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before working around

vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry or tools may short

across electrical circuits or terminals and cause damage to equipment or severe burns or

electrical shock to personnel.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

VERIFY REPAIR

(1) If ON, turn engine start switch OFF

(TM 9-2320-364-10).

(2) If removed, install optic ribbon light source lamp

(3) If removed, install optic ribbon light source lamp

socket in optic ribbon light source (WP 0043).

(4) If removed, install optic ribbon light source

(5) Install heater compartment access panel and eight

screws (TM 9-2320-364-20).

(6) Turn engine start switch ON (TM 9-2320-364-10).

(7) Inspect fan control switch, heater cable, defrost

cable, AC cable, and temperature control switch

(a) If all five labels do not illuminate, fault has not

been corrected. Turn engine switch OFF and

notify Supervisor.

(b) If all five labels illuminate, fault has been

corrected.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC221

END OF WORK PACKAGE

0016-9/(0016-10 blank)