INSTALLATION - TB-9-2320-364-13-P-10284

DRAFT

TB 9-2320-364-13&P-1

AC CONDENSER MOUNTING BRACKET REPLACEMENT - Continued

INSTALLATION

PLSAC003

NOTE

Perform Steps 1 and 2 if support bar and stabilizer bracket were removed.

1. Install stabilizer bracket (19) on vehicle with two washers (22), lockwashers (21), and screws (20).

NOTE

Install support bar as noted prior to removal.

2. Install support bar (10) and cushion clip (18) on stabilizer bracket (19) with screw (17) and locknut (4).

Do not tighten locknut (4).

WARNING

Condenser mounting bracket is heavy. Do not install condenser mounting bracket

without the aid of an assistant. Failure to comply may result in injury to personnel

and/or damage to equipment.

NOTE

Install eyebolts as noted prior to removal.

Use care when installing eyebolts so locknuts securing eyebolts to radiator assembly are

not dropped.

3. With the aid of an assistant, install condenser mounting bracket (7) on radiator assembly (16) with two

eyebolts (15) and locknuts (14).

0027-6