INSTALLATION - TB-9-2320-364-13-P-10293

DRAFT

TB 9-2320-364-13&P-1

AC CONDENSER REPLACEMENT - Continued

INSTALLATION

PLSAC027

NOTE

Perform Steps 1 through 3 if replacing condenser.

CAUTION

Use extreme care not to drill into condenser any farther than needed when drilling

four holes for battery diagram. Failure to comply may result in damage to

condenser.

1. Using battery diagram instruction plate (21) as a template, mark and drill four .125 in. (3.18 mm) holes

(22) in condenser (7).

2. Remove paper backing and install battery diagram instruction plate (21) on condenser (7) with four rivets

(23).

0028-7