CONDENSOR INSTALLATION - continued - TB-9-2320-364-13-P-10503

TB 9-2320-364-13&P-1

30. Install support bar (36) on condensor mounting

bracket (26) with screw (39) and locknut (40).

WARNING

Condensor weighs 75 lbs. (34 kg). Do not

lift condensor without the aid of an assistant.

Failure to comply may result in injury to

personnel.

31. With the aid of an assistant, position condensor (11)

on top of battery box cover (41).

NOTE

Only hand-tighten hoses 2521 and 2424 on

fittings in Steps (32) and (33).

Make sure hose 2424 routes under hose 2521

in Step (33).

Ensure preformed packings are in place in

hoses prior to installation.

32. Install preformed packing (42) and hose 2521 (32)

on fitting (43).

33. Install preformed packing (44) and hose 2424 (33)

on fitting (45).

CAUTION

When installing condensor on condensor

mounting bracket, two hoses and wire harness must

be carefully tucked into the inside of panel,

with the condensor inlets aligned with cutouts

made in Step (4). Failure to comply may result

in damage to equipment.

34. With the aid of an assistant, install condensor (11)

on condensor mounting bracket (26) with four

screws (46).

0055-33