Enter the Setpoint

TM 10-4110-262-13&P

0004 00

Enter the Setpoint

CAUTION

Do not accidentally move the thermostat dial. The thermostat setpoint

can be changed by moving the dial without pressing the setpoint key.

Failure to comply may result in damage to the equipment or loss of

stored commodities.

The setpoint can be set and changed with the following steps:

1. Press the setpoint key and the display will show the thermostat setpoint. The setpoint indicator will

illuminate.

NOTE

Do not change the setpoint unless the setpoint indicator is illuminated.

2. Watch the controller display and turn the thermostat dial to the desired thermostat setpoint.

3. Release the setpoint key. The return air temperature should appear on the display after 10 seconds.

END OF WORK PACKAGE

0004 00-8