 |
|||
|
|
|||
|
Page Title:
Setpoint Differential Adjustment |
|
||
| ||||||||||
|
|
 TM 10-4110-262-13&P
0005 00
Setpoint Differential Adjustment
The factory thermostat setpoint differential is 4 F (2 C). Do not change thermostat setpoint differential
unless necessary. See the instructions below if you must change the thermostat setpoint differential.
1. Adjust the thermostat setpoint differential to 4 F (2 C).
2. Remove the controller from its bracket.
3. Remove the cover from the back of the controller.
4. Turn the adjusting potentiometer to the 12 o'clock position.
5. Replace the cover and place the controller back in its bracket.
Table 2. Adjusting the Setpoint Differential.
1.
1 Amp Fuse
2.
12/24 Volt Jumper
3.
Main Harness Plug
4.
Dip Switches
5.
Sensor Plug
6.
Setpoint Differential Potentiometer Set to 12 o'clock position
0005 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals