PREPARATION FOR MOVEMENT - TM-10-4110-262-13-P0063

TM 10-4110-262-13&P

0005 00

WARNING

For ADR-300 systems that will be airlifted, the hook and handle

assemblies should be left unlocked, using only the main door handle to

hold the door closed. This will allow pressure relief, if necessary during

flight. Failure to comply may cause serious injury or death to personnel.

Failure to comply may also cause equipment to implode or explode

causing hazard to the aircraft.

Lock the cargo door and confirm the seal is satisfactory.

Confirm that the drain plug, located under the door on the front face of the IC, is installed.

As near as possible to the departure time, shut down the RU and disconnect the power cord from

the source of power.

Move the container as described previously in this work package.

Drain Plug

If the ADR-300 is to be moved in a non-operational condition:

1. Turn off interior light.

2. Shut down the RU and disconnect the power supply cord from the RU connector.

3. Clean the container interior as described in Work Package 0017 00.

4. Restrain all loose items inside the container to the restraint rings on the floor of the IC.

5. Close and lock the cargo door.

6. Move the container as described previously in this work package.

0005 00-17