Threaded Insert

TM 10-4110-262-13&P

0023 00

Threaded Insert

1. Remove the flange from the damaged threaded insert by drilling the threaded insert with a -in.

(0.490 0.500) drill bit.

2. Press the remaining portion of the damaged threaded insert into the interior of the container wall.

3. Assemble the threaded insert installation tool, anvil and mandrel.

4. Thread the replacement threaded insert onto the mandrel.

5. Insert the free end of the replacement threaded insert into the hole from which the damaged threaded

insert was removed.

6. Set the threaded insert as described in the installation tool literature. Remove the tool from the

installed threaded insert.

END OF WORK PACKAGE

0023 00-6