REMOVE - TM-10-4110-262-13-P0138

TM 10-4110-262-13&P

0024 00

REMOVE

Fuses 1, 2, 3, 4

1. Open the RU electrical enclosure by removing the retaining bolts in each of the four corners of the

cover.

2. Locate the fuse on the printed circuit board. Using needle-nose pliers, gently pull the fuse straight out

of the socket.

Fuse 4/1

1. Open the control box enclosure by turning the handle turn. Lower the cover and support it in the

open position.

2. Loosen the two setscrews securing the controller to its mounting bracket.

3. Gently remove the controller to the limits of its attached wires.

4. Remove the back cover to access the fuse.

5. Remove the fuse.

Fuses 5, 6, and 7

Unscrew the fuse holder and remove the fuse from the socket.

TEST

Fuse 1

1. Remove Fuse 1. Check for continuity on fuse.

2. If there is no continuity, replace with an identical fuse.

3. If there is continuity, reinstall the fuse.

4. Connect all power sources.

5. Verify Proper operation.

0024 00-2