|
| |
TM 10-4130-239-14
4-41.
STARTING CONNECTION ASSEMBLY REPLACEMENT (CONT)
1.
Using multimeter, check power cable for 12 volts power source.
If correct voltage is present, go to step 2.
If correct voltage
is not present, obtain correct voltage before going to next step.
2.
Connect power cable to 12/24 INPUT POWER FOR STARTING connection.
3.
Using multimeter, check back of STARTING connection assembly for
12 volts.
If correct voltage is not present, replace assembly.
1.
Drain engine oil (para 4-1).
2.
Turn water chiller on its side with STARTING connection assembly
up.
4-91
|
