Starting the Equipment.

TM 5-4110-217-14

d. Open hand valves and service valves on

(5) Grasp the rope handle firmly and pull with

a sharp snap to spin the engine.

compressor and receiver as the unit is shipped pump-

(6) Repeat as necessary until the engine

down.

e. Move the ON-OFF switch to the ON position

starts.

c. Set the thermostat to the temperature desired

and the unit should start and operate without

in the box, by turning the adjusting knob on the front of

the control panel.

The operation of the unit is

automatically controlled by thermostat.

Change 3 2-4.1/(2-4.2 blank)