Figure 3-1. Lubrication Order (Sheet 2 of 2)

TM 5-4110-217-14

-KEY-

EXPECTED TEMPERATURES

TOTAL

LUBRICANTS

CAPACITY

Above 32F

40F to -10F

0F to -65F

MAN HR

BALL and ROLLER BEARING GREASE.

ALL TEMPERATURES

Automotive & Artillery

Intervals

given are

In hours

of normal

DE-OIL, Engine, Heavy Duty

operation

OE/H030

OE/MD010

OEA

Crankcase

3 1/2 qts

Oil Cleaner

6 ounces

OEA-OIL, Engine, Sub-zero

s/a above

RCO-OIL, Lubricating, Refrigerant,

4 Pints

Compressor

ALL TEMPERATURES

NOTES:

FOR

OPERATION

EQUIPMENT

PROTRACTED COLD TEMPERATURES BELOW 10F.

COMPRESSOR UNIT. This unit will be serviced by

(-23 C). Remove lubricants prescribed In the key for

Direct or General Support Personnel only. 4 pints of oil

temperatures above 10-F. (-230C). Relubricate with

is quantity that shall be in compressor crankcase after

lubricants specified in the key for temperatures below

removal and prior to reinstallation.

IOF. (-23-C).

Refer to chapter 6, for procedure to obtain proper oil level

Copy of this Lubrication Order will remain with the equip-

in refrigeration system.

ment at all times. Instructions contained herein are

mandatory.

FOLD

By Order of the Secretary of the Army

AIR CLEANER. Refill oil reservoir to level mark.

Every 50 hours, disassemble entire unit, clean, re-oil,

and reassemble.

BERNARD W ROGERS

General, United States Army

Chief of Staff

LUBRICANTS The following is a list of lubricants

with the Military Symbols and applicable Specification

Official:

numbers.

J C. PENNINGTON

Brigadier General, United States Army

OE MIL-L-2104

The Adjutant General

RCO VV-G-825

GREASE,BALL and ROLLER BEARING

MIL G25013

9150-00-141-6770 1 Lb. Can

9150-00-141-6771 35 Lb. Pail

Figure 3-1. Lubrication Order (Sheet 2 of 2)

Change 2 3-3