 |
|||
|
|
|||
|
Page Title:
Figure 3-16. Starter Motor and Starter Solenoid (Model RMP- J/1-10G) |
|
||
| ||||||||||
|
|
 TM 5-4110-217-14
1.
Solenoid, starter
10.
Washer, lock
19.
Washer, lock
28.
Terminal
2.
Nut
11.
Washer, flat
20.
Terminal
29.
Nut
3.
Washer
12
Terminal
21.
Terminal
30.
Washer.
lock
4.
Nut
13.
Nut
22.
Nut
31.
Flange, starter mounting
5.
Washer
14.
Washer, lock
23.
Washer, lock
32.
Screw, cap
6.
Terminal
15.
Washer, flat
24.
Washer, flat
33.
Washer, lock
7.
Nut
16.
Grommet
25.
Grommet
34.
Starter motor
8.
Washer
17.
Cable, starter to solenoid
26.
Nut
35.
Washer, lock
9.
Nut
18.
Nut
27.
Washer, lock
36.
Screw, cap
Figure 3-16. Starter Motor and Starter Solenoid (Model RMP- J/1-10G)
so engine can be easily rotated by hand.
screw (125, fig. 3-11) and lockwasher (126, fig.3-11).
c. Remove two mounting screws (A) (Fig. 3-18)
(5) Install blower housing per paragraph 3-
42c(4).
and pull points out of box just far enough so screw (B)
(6) Install ignition cables (fig. 3-8).
can be removed. Replace points with a new set but do
not completely tighten mounting screws (A).
3-44.
Breaker Point Servicing.
NOTE
a. Remove two screws and cover on the breaker
mechanism box (fig. 3-11, items 97, 96).
Each time new breaker points are
b. Remove both spark plugs(fig. 3-11, item 84)
installed, place a drop of oil on the
point's pivot point.
3-24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals