Figure 4-16. Defrost in Progress Light

TM5-4110-234-14

TO 40R7-5-7-1

Should the total assembly be damaged and need replacement.

(1)

Disconnect powep.

(2)

Remove the two screws and lock washers and open the hinged control panel.

(3)

Tag and remove the wires.

(4)

Remove the nut and lock washer from the back side and pull the light assembly from the panel.

Installation.

(1) Assemble parts as shown on figure 4-16. Note that bulb is not supplied as part of light assembly. It

must be ordered separately.

(2)

Connect the wire leads. See tags and wiring diagram figures 4-5 or 4-6.

(3)

Close the hinged control panel and secure with two screws and lock washers.

(4)

Connect power.

4-27.

REFRIGERATOR ON-OFF SWITCH See figure 4-14.

This is a two-position toggle switch.

Removal.

(1)

Disconnect power.

(2)

Remove the two screws and lock washers and open the hinged control panel.

4-39