Figure 5-11. Valve Plate Removed

TM5-4110-234-14

TO 40R7-5-7-1

(4)

Remove suction valves and suction valve positioning springs from dowel pins. See figure 5-12.

Figure 5-12. Suction Valve and Positioning Springs in Place

(5) Inspect the valves, valve seats, and valve springs for wear or damage. Replace complete valve plate if

cracked or worn.

WARNING

Dry cleaning solvent (Fed Spec P-D-680) used to clean parts is potentially dangerous to

personnel and property. Do not use open flame or excessive heat. Flash point of solvent

is 100F to 138F (38C to 59C).

5-34