Section Ill. HOSE CLAMPS, HOSES, TUBE RETAINING STRAPS, PIPE PLUGS, RECEPTACLE HOLE COVERS AND TUBE CLIPS

Section Ill. HOSE CLAMPS, HOSES, TUBE RETAINING

STRAPS, PIPE PLUGS, RECEPTACLE HOLE COVERS AND TUBE CLIPS

and tube clip by removing standard hardware as

5-34. General

required.

When refrigerant system is opened for mainte-

nance, all hoses and tubes disconnected should be

b. Cleaning and Inspection.

removed, cleaned, inspected, and reinstalled se-

(1) Clean all parts with an approved solvent

curely.

and dry thoroughly.

(2) Inspect hoses for signs of wear. Inspect

5-35. Hose Clamps, Hosesr Tube Retaining

all parts for cracks, breaks or other defects. In-

Straps, Pipe Plugs, Receptacle

s p e c t threaded parts for worn or damaged

Hole Covers and Tube Clip

threads.

a. Removal.

(3) Replace damaged or defective parts.

(1) Remove the front access panel (para

c. Installation. Install all internal parts by re-

versing order of removal.

(2) Remove the air conditioning filter (para

d. Pressure test system.

(3) Discharge the refrigerant system.

e. Recharge the system.

(4) Remove the hose clamps, hoses, tube re-

f. Install panel.

taining straps, pipe plugs, receptacle hole covers

AGO 20053A