|
| |
(6) Install screw (15), washers (18) lock
(8) Assemble three posts (26) to front plates
washer (17) and nut (16) with ground terminal
with screws (24) and washers (25). Position poets
between the two flat washers (18).
against frame and install screws (6). Install roll pin
(7) Install temperature control switch ( 14) on
(5).
frame and secure switch with four screws (11), nuts
(9) Pass capillary tube through opening in
(12), and flat washers (13). Install loop damp (10)
bottom of cover (2) and install cover on module.
on capillary tube and install screw (7), spacer (9),
Install grommet (3) and four screws (1).
washer (21). clamp and nut (8).
6-12
|
