Condenser Fan - TM-5-4120-273-150040

TM 5-4120-273-15

b. Removal. Refer to figure 3-7 and remove in-

3-24. Fan Motor

let ring and evaporator fan.

a. Removal. Refer to figure 39 and remove

c. Installation. Refer to figure 37 and install

motor.

inlet ring and evaporator fan.

b. Inspection and Testing.

3-23. Condenser Fan

(1) Inspect for dents, cracks and broken or

a. Removal. Refer to figure 3-3 and remove

damaged leads.

b. Inspection. Inspect unit for dents, cracks,

(2) Test for continuity across windings with

bends and chipped paint.

a multimeter set on OHMS. Refer to the wiring

c. Installation. Refer to figure 3-8, and install

diagram figure 1-5 to establish points for continu-

ity.

NOTE: TAG AND DISCONNECT ELECTRICAL LEADS, UNSOLDER

AND DISCONNECT TUBING AS NECESSARY.

ME 4120-273-15/3-6

Figure 3-6. Compressor, pressure relief valve, access fittings, liquid line solenoid

vavle, filter-drier, removal and installation.