Click here to make tpub.com your Home Page

Page Title: Chapter 6: REPAIR INSTRUCTIONS
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-4120-273-15
REPAIR INSTRUCTIONS
Section I. COMPRESSOR
6-2. Compressor
6-1. General
The compressor is hermetically sealed and cannot
a. Removal. Refer to figure 3-6.
be repaired. In case of a failure the compressor
b. Installation. Refer to figure 3-6.
must be replaced.
Section II. CONDENSER COIL, EVAPORATOR COIL
(2) Remove the (8) screws holding the con-
6-3. General
denser coil grille, reference figure 3-4. These (8)
The evaporator and condenser coils must be re-
screws also hold the condenser to the frame.
moved from the air conditioner for repair and re-
(3) In order to remove the condenser coil
placement.
remove 3 screws holding filter-drier bracket to
shell, refer to figure 3-6.
6-4. Evaporator Coil
(4) To remove these 3 screws from filter-
drier bracket you have to remove the front access
a. Removal. Remove screws (6) that hold evap-
panel figure 3-5, remove junction box and control
orator coil to mounting bracket. Refer to figure
3-16 and remove evaporator coil.
(5) Pull condenser coil, refer to figure 3-4
b. Repair. Repair minor leaks or holes by sol-
from unit and unsolder as required.
dering with silver solder (class 4 or 6A QQS-561)
per MIL-B-7883. If damage is excessive replace
b. Repair. Repair minor leaks or holes by sol-
evaporator coil.
dering with silver solder (class 4 or 6A QQS-
c. Installation. Refer to figure 3-16, and install
561) per MILB-7883. If damage is excessive re-
evaporator coil.
place condenser coil.
(1) Leak test the entire system. Refer to
c. Installation.
(1) Replace condenser coil.
(2) Evacuate the system (para 5-21c).
(2) Leak test the entire system. Refer to
(3) Recharge the system (para 5-21d).
(3) Evacuate the system (para 5-21c).
6-5. Condenser Coil
(4) Recharge the system (para 5-21d).
a. Removal.
(5) Replace screws in filter-drier bracket.
(1) Evacuate the system, reference para-
(6) Replace condenser coil grille, figure
graph 5-21.
3-4.
Section III. HIGH PRESSURE SWITCH, LOW PRESSURE
SWITCH, FAN SPEED PRESSURE SWITCH
b. Removal.
6-6. High Pressure Switch
a. General. The high pressure switch prevents
(1) Remove top panel, condenser fan guard,
the compressor from operating if the head pres-
condenser fan refer to paragraph 3-18 and 320.
sure exceeds 445 psig.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business