Strainer Dehydrator

(2) Inspect the receiver for leaks or damage.

(3) Replace a defective receiver.

Installation.

(1) Install the receiver in the unit securing with hex nut under

the unit.

(2) Connect inlet and outlet tubes (para 75).

(3) Leak test, evacuate, and charge the system (para 74).

(4) Install top, left -side, and rear panels (para 39).

80. Strainer Dehydrator (figure 4).

a. Removal.

(1) Remove the top and right-side panels (para 39).

(2) Release refrigerant charge (para 74).

(3) Disconnect the inlet and outlet tubes from the strainer (para

(4) Remove the strainer (figure 4).

Cleaning and Inspection. Throw away the strainer and replace.

c. Installation.

(1) Place the dryer strainer in the unit and connect the tubes

(2) Leak test, evacuate, and charge the refrigerant system (para

(3) Install top and right-side panels (para 39).

Expansion Valve

a. Removal.

(1) Remove the top and right-side panels (para 39).

(2) Release the refrigerant charge (para 74).

(3) Disconnect the flare inlet and outlet connections. Use only

a flare nut wrench (figure 4).