Maintenance Code. - TM-5-4120-298-23P0010

TM 5-4120-298-23P

Definition

Code

Definition

An item of a depot overhaul/repair kit

Item is not procured or stocked. If not

and not purchased separately. Depot

available through salvage, requisition.

kit defined as a kit that provides items

required at the time of overhaul or

Installation drawing, diagram, in-

repair.

struction sheet, field service drawing,

that is identified by manufacturer's

An item of a maintenance kit and not

part number

purchased separately. Maintenance kit

defined as a kit that provides an item

A support item that is not stocked.

that can be replaced at organizational

When required, item will be procured

or intermediate levels of maintenance.

through normal support channels.

NOTE

Item included in both a depot over-

Cannibalization or salvage may be used as a

haul/repair kit and a maintenance kit.

source of supply for any items coded above ex-

cept those coded XA and aircraft support items

Item to be manufactured or fabricated

as restricted by AR 700-42.

at organizational level.

Item to be manufactured or fabricated

(2) Maintenance Code. Maintenance codes

at the direct support maintenance

are assigned to indicate the levels of maintenance

level.

authorized to USE and REPAIR support items. The

maintneance codes are entered in the third and

fourth positions of the Uniform SMR Code format

Item to be manufactured or fabricated

as follows:

at the general support maintenance

level.

(a) The maintenance code entered in the

third position will indicate the lowest maintenance

Item to be manufactured or fabricated

level authorized to remove, replace, and use the sup-

at the depot maintenance level.

port item. The maintenance code entered in the

third position will indicate one of the following lev-

Item to be assembled at organizational

els of maintenance:

level.

Code

Application/Explanation

Item to be assembled at direct support

Crew or operator maintenance per-

maintenance level.

formed within organizational

maintenance.

Item to be assembled at general sup-

port maintenance level.

Support item is removed, replaced,

used at the organizational level.

Item to be assembled at depot mainte-

nance level.

Support item is removed, replaced,

used by the direct support element of

Item is not procured or stocked be-

integrated

direct

support

maintenance.

cause the requirements for the item

will result in the replacement of the

next higher assembly.

Support item is removed, replaced,

used at the direct support level.