|
| |
4-1
4-2
4-3
4-4
4-5
TM 740-90-1
CHAPTER 4
SHIPMENT AND LIMITED STORAGE
T0 PREVENT ENEMY
AND DEMOLITION
USE
Section I. SHIPMENT AND LIMITED STORAGE
Section II. DEMOLITION OF MATERIEL TO PREVENT ENEMY USE
cess panels and grilles. Fire several rounds of
large caliber ammunition at vital parts, i.e., the
compressor, evaporator, blower motor and service
valves. For most effective destruction use high
explosive shoulder weapons (recoiless rifle,
rocket launcher, etc). Incendiary weapons are
also recommended.
4-6. Other Demolition Methods
a. If components cannot be destroyed or
smashed, drain the oil from the compressor. and
discharge the refrigerant. Operate the unit at
full speed.
Warning: Do not inhale refrigerant fumes
or make bodily contact with the refrigerant.
Discharge refrigerant into the atmosphere.
b. Components may be removed and scattered
and concealed by burial in remote areas. Remove
any evidence of burial by brushing ground with,
branches.
c. If a lake, river, or other large enough body
of water is’ available, the unit and component
may be destroyed by submersion. Be certain that
the unit and any components are completely sub-
merged and not visable from the surface.
4-1
|
