|
| |
TM5-4120-339-24P
H
The lowest maintenance level capable of
complete repair of the support Item is the
general support level.
D
The lowest maintenance level capable of
complete repair of the support item is the depot
level.
L
Repair restricted to designated specialized
repair activity.
Z
Nonreparable. No repair is authorized.
B
No repair is authorized. The item may be
reconditioned by adjusting, lubricating, etc., at
the user level. No parts or special tools are
procured for the maintenance of this item.
(3)
Recoverability Code. Recoverability
codes are assigned to support items to indicate the
disposition
action
on
unserviceable
items.
The
recoverability code is entered In the fifth position of the
Uniform SMR Code format as follows:
Recoverability
Codes
Definition
Z
Nonreparable item. When unserviceable,
condemn and dispose at the level indicated in
Position 3.
O
Reparable
item.
When
uneconomically
reparable,
condemn
and
dispose
at
organizational level.
F
Reparable
item.
When
uneconomically
reparable, condemn and dispose at the direct
support level.
H
Reparable
item.
When
uneconomically
reparable, condemn and dispose at the general
support level.
D
Reparable item. when beyond lower level repair
capability, return to depot. Condemnation and
disposal not authorized below depot level.
L
Reparable item. Repair, condemnation, and
disposal not authorized below depot speclalized
repair activity level.
A
Item requires special handling or condemnation
procedures because of specific reasons (I.E.,
precious metal content, high dollar value, critical
material or hazardous material). Refer to
appropriate manuals/directives for specific
Instructions.
c.
National Stock Number. Indicates the
National Stock Number assigned to the item and will be
used for requisitioning purposes.
d. Part Number. Indicates the primary number
used by the manufacturer which controls the design and
characteristics of the item by means of its engineering
drawings, specifications standards, and inspection
requirements to identify an item or range of items.
Note
When a stock number Is requisitioned the
repair part received may have a different part
number than the part being replaced.
e.
Federal Supply Code for Manufacturer
(FSCM). The FSCM is a 5-digit numeric code listed in
SB 708-42 each is used to identify the manufacturer,
distributor, or Government agency etc.
f.
Description. Indicates the Federal item
name and if required, a minimum description to identify
the item. Items that are included in kits with the quantity
of each item in the kit or set indicated in the quantity
incorporated in unit column. When the part to be used
differs between serial numbers of the same model, the
effective serial numbers are shown as the last line of the
description. In the Special Tools List, the initial basis of
issue (BOI) appears as the last line in the entry for each
special tool, TMDE, and support equipment. When
density of equipments supported exceeds density
spread indicated in the basis of issue, the total
authorization is increased accordingly.
3
|
