Figure 4-10. Top Covers

TM5-4120-347-14

(4) The top front and rear covers must be removed prior to removal of the top center panel.

Dry cleaning solvent (Fed Spec P-D-680) used to clean parts is potentially dangerous to personnel

and property. Do not use near open flame or excessive heat. Flash point of solvent is 100F to 138F

(38C to 59C).

c. Cleaning. Clean the covers with a cloth dampened with a detergent solution or dry cleaning solvent (Fed

Spec P-D-680). Use a soft brush if necessary to dislodge caked on dirt. Dry the items thoroughly,

d. Inspect. Inspect top covers for breaks, cracks, dents, loose or missing mounting hardware or other

defects. Refer repairs or replacement to direct support maintenance.

e. Installation.

(1) Install center cover first.

(2) Install remaining top covers and fabric cover.

(3) Connect power at power source.

4-29