Click here to make tpub.com your Home Page

Page Title: Capacitors (Model VM 6000-115 only).
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-4120-355-14
4-20. Capacitors (Model VM 6000-115 only).
a. Removal. Refer to figure 4-7 and remove 4-7 and remove capacitors.
b. lnspection andTesting.
(1) Inspect for cracked case and broken or damaged contacts.
(2) Use a multimeter set on OHMS. Refer to wiring diagram, figure 1-3. A full scale reading should be made
with a steady return to zero.
c. Installation. Refer to figure 4-7 and install capacitors.
4-21. Evaporator Fan and lnlet Ring.
a. General. The units are equipped with a centrifugal inclined blade evaporator fan. The fan reduces excessive
vibration and noise.
b. Removal. Refer to figure 4-8 and remove inlet ring and evaporator fan.
c. Installation. Refer to figure 4-8 and install inlet ring and evaporator fan.
4-22. Condenser Fan.
a. Removal. Refer to figure 4-9 and remove condenser fan.
b. lnspection. lnspect fan for dents, cracks, bends, and chipped paint.
c. Installation. Refer to figure 4-9 and install condenser fan.
4-23. Fan Motor Relays.
a. General. Fan motor relays are located in the top of the unit, figures 4-10 and 4-11. The relay starts the fan motor
and controls the high and low speeds.
b. Removal. Refer to figures 4-10 and 4-11 and remove the fan motor relays.
c. Inspection and Testing.
(1) Inspect for pitted or burned contacts.
(2) Test for continuity across coil with multi meter set on OHMS. Refer to wiring diagram, figure 1-3, to estab-
lish points of continuity.
d. Installation. Refer to figures 4-10 and 4-11 to establish points of continuity.
4-24. Control Box.
a. General. The control box houses the selector switch, thermostat, and hi-lo fan speed switch and is mounted on
the junction box. The selector switch is manually operated, five-position switch. Automatic control of both heating
and cooling cycles is provided by the thermostat. The hi-lo fan speed switch controls the fan speed. The control box may
be used in a remote position by utilizing a blockoff plate and a remote control cable, figure 4-2A and C.
4-15

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business