Special In Formation.

TM 5-4120-355-24P

repair capability, return to depot. Con-

betical abbreviation (e.g., ea, in., pr, etc.). When the

demnation and disposal not authorized

unit of measure differs from the unit of issue, the

below depot level.

lowest unit of issue that will satisfy the required

units of messure will be requisitioned.

Reparable item. Repair, condemnation,

and disposal not authorized below depot/

h. Quantity Incorporated in Unit. Indicates

specialized repair activity level.

the quantity a f the item used in the breakout shown

on the illustration figure, which is prepared for a

Item requires special handling or con-

functional group, sub functional group, or an assem-

demnation procedures because of specific

bly, A "V" appearing in this column in lieu of a

reasons (i.e., precious metal content, high

quantity indicates that no specific quanity is appli-

dollar value, critical material or haz-

cable (e.g., shims, spacers, etc.).

ardous material). Refer to appropriate

manuals/directives

for

specific

4. Special In Formation.

instructions.

a. Detailed assembly instructions for items

source coded tO be assembled are found in TM 5-

c. National Stock Number. Indicates the Na-

4310-362-14. Assembly components are listed im-

tional stock number assigned to the item and will be

mediately foillowing the item to be assembled.

used for requisitioning purposes.

b. The follwing publications pertain to the Air

d. Part Number. Indicates the primary number

Conditioner and its components.

used by the manufacturer which controls the design

TM 5-4120 -355-14

Operator, Organizational,

and characteristics of the item by means of its en-

Direct Support and General

gineering drawings, specifications, standards, and

Support Maintenance Man-

inspection requirements to identify an item or

ual.

range of items.

c. I d e n t i f i c a t i o n o f

the u s a b l e o n

NOTE

codes

included

the

description

When a stock numbered item is requi-

column

publication

are:

this

sitioned, the repair part received may

when

(Applicable

identifying

only

have a different part number than the

parts to particular model).

part being replaced.

e. Federal Supply Code for Manufacturer

Code

Use On

(FSCM). The FSCM is a 5-digit numeric code listed

CYY

in SB 708-42 which is used to identify the manu-

Model

VM6000-115

facturer, distributor, or Government agency, etc.

CYX

VM6000-400

Model

f. Description. Indicates the Federal item

name and, if required, a minimum description to

5. How to Locate Repair Parts.

identify the item. Items that are included in kits

a. When National Stock Number or Part

and sets are listed below the name of the kit or set

Number is Unknown:

with the quantity of each item in the kit or set indi-

(1) First. Using the table of contents, deter-

cated in the quantity incorporated in unit column.

mine the assembly group within which the repair

When the part to be used differs between serial

part belongs. This necessary since illustrations are

numbers of the same model, the effective serial

prepared for assembly groups, and listings are di-

numbers are shown as the last line of the descrip-

vided into the same groups.

tion. In the Special Tools List, the initial basis of

issue (BOI) appears as the last line in the entry for

(2) Second. Find the illustration covering

each special tool, TMDE, and support equipment.

the assembly group to which the repair part be-

When density of equipments supported exceeds den-

longs,

sity spread indicated in the basis of issue, the total

(3) Third. Identify the repair part on the il-

authorization is increased accordingly.

lustration and note the illustration figure and item

g. Unit of Measure (U/M). Indicates the stan-

number of the repair part.

dard of the basic quantity of the listed item as used

(4) Fourth Using the Repair Parts Listing,

in performing the actual maintenance function.

find the figure and item number noted on the illus-

This measure is expressed by a two-character alpha-

tration.