3-21. TOP EVAPORATOR COVER
Preliminary Procedure: Remove shelter adapter rain shield. (See Shelter Manual.)
Figure 3-15. Top Evaporator Cover
Disconnect electrical power prior to removing outside covers. Turning unit off a
control module does not disconnect power to air conditioner.
(1) Turn air conditioner off a circuit breaker and disconnect power cable at washboard.
(2) Using screwdriver, remove thirty-six screws.
(3) Carefully lift the top cover from the air conditioner.
(1) Check that cover is not bent or punctured. Replace if damaged.
The danger plate is not supplied as part of the top evaporator cover assembly.
|Integrated Publishing, Inc.|