 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-369-14
CONDENSER LOUVERS
Inspect.
a.
(1) Inspect condenser louvers for looseness of hardware
(2) Inspect for bent or jammed louvers.
Service.
b.
--
(1) Clean louvers, and remove any dirt jamming the opening.
(2) Clean top and bottom of louvers at hinge points to be sure louvers can
rotate easily.
4-25.
CONDENSATE WATER DRAIN TUBES.
Condensate water drain tubes.
Removal,
a.
(1) Refer to paragraph 4-19 and remove the evaporator air inlet louver and air filter.
(2) Refer to figure 4-7 and remove clamps which hold plastic drain tubes to fittings.
Inspection and Servicing.
b.
(1) Inspect tubes for cracks, obstructions and loose connections.
(2) Clean tubes wit h low pressure compressed air or flush with water.
Installation.
c.
(1) Refer to figure 4-7 and replace tubes and clamp securely.
(2) Refer to paragraph 4-19 and replace the evaporator air inlet louver.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals