RECTIFIER (CR-1) AND CAPACITORS (C-1 and C-2)

TM 5-4120-369-14

4-31.

General.

The rectifier and capacitors are located on the bulkhead of the junction box

compartment.

Rectifier and capacitors

Removal.

(1) Refer to paragraph 4-27 and remove the junction box.

(2) Refer to figure 4-21 and detach the cable from the rectifier.

(3) Remove the capacitors from the rectifier cable terminals.

(4) Remove the rectifier by removing the two mounting screws and washers.

Inspection and Test.

(1) Inspect rectifier and both capacitors for cracked or broken case and signs of

overheating. Replace if scorched or blistered, or if case is damaged.