REAR OF HOUSING
4. Rear Panel
a. Remove fourteen (14) screws securing rear panel.
b. Remove rear panel.
and removing condenser coil.
5. Refrigerant System Refer to paragraph 5-7 and discharge refrigerant system.
Loosen setscrew in hub of condenser fan and slide
condenser fan towards bulkhead.
b. Remove two (2) screws securing frame to condenser shroud.
c. Remove six (6) screws securing condenser shroud to
d. Slide condenser shroud back against bulkhead.
e. Unsolder and remove two (2) refrigerant lines from
f. Remove four (4) screws from underside of base that
secures condenser coil to base.
g. Remove condenser coil.