EVAPORATOR FAN MOTOR AND HOUSING (CONT.)
Evaporator Fan Motor
and Housing Assembly
Remove eight screws (19) securing evaporator
fan housing to frame.
Remove four bolts (20), eight flat
washers (21) and four locknuts (22) securing
evaporator fan motor (23) to frame.
Remove evaporator fan motor and housing
Remove eight screws (27) securing outer inlet
rings (28) to the fan housings.
Loosen set screws (24) in hubs of both
Slide impellers (25) and housings (26) off of
the motor shafts.
Remove four screws (29) securing the inner
inlet rings (30) to the fan housings.
Remove impellers from fan housings.
Remove four screws (33) and four
locknuts (34) securing evaporator fan housing
mounting brackets (18) to evaporator housing.