|
| |
TM5-4120-376-14
4-17. EVAPORATOR FAN MOTOR AND HOUSING ASSEMBLY/Inspect, Service, Test, Repair,
Replace (Cont)
LOCATION/ITEM
Removal:
5. Remove two screws (17) two lock washers (18) two flat nuts (19) and two clamps (20)
securing evaporator fan motor wiring harness (21) to housing.
6. Disconnect electrical connector (P-3) (14).
7. Remove four bolts (22) four lock washers (23) evaporator fan motor and housing assembly
(48) from resilient mounts (24).
8. Remove two screws (25) two flat washers (26) and fan strap (thermostat bulb mount) (8)
from left evaporator fan housing (27).
9. Remove two screws (28) two flat washers (29) and fan strap (30) from right evaporator fan
housing (35).
10. Loosen two set screws (31) securing motor extension shafts (32) to motor shaft (48).
11. Remove eight screws (33) eight lock nuts (34) and fan housings (27)(35) from evaporator
fan and motor base (36).
12. Remove four screws (37) four flat washers (38) and fan straps (39) from evaporator fan
housings (27)(35).
13. Remove sixteen lock nuts (40) four flanges (41) and four inlet rings (42) from evaporator
fan housings (27)(35).
4-62
|
