|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/lnspect, Test, Replace (Cont)
LOCATION/ITEM
Installation:
Junction Box
CAUTION
Be careful when installing junction box not to damage plastic relay covers.
1. Attach wires to appropriate
terminals on TB-4, TB-2 and ground
E-3 in accordance with Appendix E
and remove tags.
2. Align one clamp (38) and wire
harness with holes in housing.
3. Secure harness and clamp with
one screw (36) and one washer (37).
4. Align electrical connectors J-11, J-7, J-4, J-5, J-10, J-9, J-8 and J-3 with holes in
bulkhead.
5. Secure above with retaining nuts (31) and (32).
4-118
|
