|
| |
TM5-4120-376-14
4-23. AMBIENT THERMOSTAT AUXILIARY POWER INLET/Inspect, Test, Repair, Replace
(Cont)
LOCATION/ITEM
Removal:
2. Remove eight screws (4) and eight lock washers (5) and front louver
(6) from housing.
3. Remove two screws (7) two lock washers (8) and two clamps (9) and
(10) from left evaporator fan housing assembly (11).
(evaporator discharge)
thermostat sensor bulb
4. Loosen connector knob (12) securing control module (13) from junction box (14).
5. Remove junction box in accordance with paragraph 4-22, page 4-109.
6. Remove four screws (15) four flat washers (16) and four lock nuts (17) securing inlet power
wiring harness (J-1) (18) to junction box.
7. Remove connector cover (19) plate (20) and gasket (21).
4-128
|
