|
| |
TM5-4120-376-14
4-26. HOUSING ASSEMBLY/Repair, Replace (Cont)
LOCATION/ITEM
Removal:
3. Remove
housing.
4. Remove
5. Remove
6. Remove
ten screws (7) and ten lock washers (8) and front louver (evaporator inlet) (9) from
condenser louver cable actuator in accordance with paragraph 5-18, page 5-26.
control cable assembly in accordance with paragraph 5-18, page 5-24.
condenser fans, motors and support assemblies in accordance with paragraph
4-15, page 4-39.
7. Remove
5-21.
8. Remove
9. Remove
condenser fan and motor support (“X”) in accordance with paragraph 5-17, page
eighteen screws (10) and condenser coil guard (11) from housing.
condenser coil in accordance with paragraph 5-23, page 5-73.
4-162
|
