|
| |
TM5-4120-376-14
4-26. HOUSING ASSEMBLY/Repair, Replace (Cont)
LOCATION/ITEM
Installation:
14. Install control cable assembly in accordance with paragraph 5-18, page 5-24.
15. Align front louver (evaporator inlet) (9) with holes in housing and secure front louver
(evaporator inlet) to housing with ten screws (7) and ten lock washers (8).
16. Align rear cover (4) with holes in center cover (6) and housing and secure rear cover in
center cover and housing with fourteen screws (5).
17. Align fabric cover (3) with holes in housing and secure fabric cover to housing with three
screws (1) and three lock washers (2).
4-170
|
