|
| |
TM5-4120-376-14
Table 5-1. DIRECT SUPPORT MAINTENANCE TROUBLESHOOTING (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Disconnect electrical connector J-7 (13) from compressor.
a. Using an ohmmeter or continuity tester, test compressor receptacle pin A-B,
A-C, B-C, and D-E.
b. Continuity should be indicated.
c. Test points A, B, C to compressor casing or common ground.
d. No continuity should be indicated.
(1) Replace compressor that does not meet continuity requirements.
(2) Replace compressor in accordance with paragraph 5-22, page 5-67.
5-6
|
