|
| |
TM5-4120-376-14
3-4. TOP COVERS AND FRONT LOUVERS/Inspection, Service, Adjustment
This task covers:
a. Inspection
b. Service
c. Adjustment
INITIAL SETUP
Disconnect Power
Use a cloth dampened with dry cleaning solvent (Table D-1, Item 3)
LOCATION/ITEM
FABRIC COVER
Inspect:
1. Inspect Fabric Cover (1) for damage.
2. If damaged notify Organizational
Maintenance.
WARNING
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of solvent
is 100°F (38°C).
Service:
1. Brush off loose dirt or foreign matter from Fabric Cover (1).
2. Wipe cover with a cloth dampened with dry cleaning solvent (Table D-1, Item 3).
3-7
|
