|
| |
TM5-4120-376-14
4-15. CONDENSER FANS, AND SUPPORT ASSEMBLIES/Inspect, Service, Replace (Cont)
LOCATION/ITEM
MOTOR SUPPORTS
Removal:
14. Remove two screws (45) and two lock washers (46) from control cable mounting bracket
(47) and actuator cylinder mounting bracket (48).
NOTE
Tie actuator cylinder to vibration eliminator.
15. Remove two flat nuts (49) and two lock washers (50) from actuator cylinder (51) and
actuator cylinder mounting bracket (48).
16. Remove four screws (52) and four lock washers (53) from actuator cylinder mounting
bracket (48) and remove from condenser fan supports (54).
4-43
|
