|
| |
TM5-4120-376-14
4-15. CONDENSER FANS, AND SUPPORT ASSEMBLIES/Inspect, Service, Replace (Cont)
LOCATION/ITEM
Installation:
CAUTION
1.
eight
2.
Do not hammer the impeller onto
dress out rough spots in the shaft
motor shaft. If difficulty is encountered,
with a fine file or abrasive cloth. Apply
coating of light oil to ease assembly.
Align and secure condenser fan motor supports (60)(66) with holes in bulkhead (69) with
screws (67) and eight lock washers (68).
Align and secure right condenser fan motor support (63) with holes in condenser fan motor
support (66) on bulkhead (69) with four screws (4) and four lock washers (65).
3. Align and secure condenser fan motor support (63) to condenser fan motor support (54)
with three screws (61) and three lock washers (62).
4. Align and secure left condenser fan motor support (57) with holes in condenser fan motor
support 54) condenser fan motor support (60) on bulkhead with four screws (58) and four
washers (59).
5. Align and secure left condenser fan motor support (57) to condenser fan motor support (54)
with three screws (55) and three lock washers (56).
4-46
|
