|
| |
TM5-4120-376-14
4-16. CONDENSER FAN MOTOR/Inspect, Service, Test, Replace (Cont)
LOCATION/ITEM
Repair:
10. Solder terminals on thermal overload (8) in accordance with Appendix E.
11. Slide thermal overload into condenser fan motor housing.
12. Align retaining spring (7) and thermal overload cover (6) with holes in condenser fan
motor housing.
13. Secure terminal overload cover to condenser fan motor housing with four screws (5).
14. Using an arbor press or equivalent, press the bearings (4) onto the end of the rotor, being
careful to avoid cocking the bearings.
15. Insert the rotor (3) into the stator.
16. Secure the end plates (2) to the stator with eight screws (1) tighten uniformly in
increments.
Follow on maintenance: Do the Installation Task, page 4-58.
4-55
|
