|
| |
TM 5-4120-377-14
b. Inspection
(1) Check that cover is not bent, cracked, or punctured. If damaged, refer to direct support maintenance.
(2) Check that gasket is not torn, loose, or missing. Refer
maintenance.
repair/replacement to direct support
c. Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with five screws and flat washers and two flat head screws.
4-20. ACCESS (SERVICE VALVES) COVER
Figure 4-24. Access (Service Valves)
a. Removal
(1) Using screwdriver, remove four screws and flat washers.
(2) Remove cover.
b. Inspection
(1)
(2)
Check that cover is not bent, cracked, or punctured.
Check that gasket is not torn, loose, or missing.
(3) Check that information plate is readable and in place.
(4) Refer all repairs to direct support maintenance.
c. Installation
Cover
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with four screws and flat washers.
4-53
|
