|
| |
4-50.
TM 5-4120-377-14
c. Repair
(1)
(2)
(3)
(4)
See paragraph 4-36 for general wire repair instructions.
See table 4-3 (Wire List) for wire lengths and terminal/connector information.
After repairs are complete, place junction box cover on box and aline hardware.
Using screwdriver, secure junction box cover with four captive panel fastener screws.
Follow-on procedure: Install junction box. (See para 4-46.)
Preliminary procedure: Remove junction box cover. (See para 4-47.)
Figure 4-59. Transformer (T1)
a. Removal
(1) Tag and disconnect wire leads.
(2) Using wrench, remove four nuts and lock washers from transformer mounting studs.
(3) Remove transformer and gasket.
4-98
|
