|
| |
PARA 4-7
TM 5-4120-377-14
4-9. ALTERNATE INPUT POWER CABLE CONNECTOR (J1) LOCATIONS
Figure 4-15. Alternate Input Power Connector Locations
The following instructions apply only if relocation of the input power cable connector is required.
Preliminary procedures: 1. Remove rear panel. (See para 4-32.)
2. Remove lower front panel. (See para 4-29.)
3. Remove conditioned air intake grille. (See para 4-24.)
a. Determine which alternate location is best.
b. Using screwdriver and wrench, remove four screws, lock washers, and nuts from cover plate.
Figure 4-16. Cover Plate Removal/lnstallation
4-20
|
