CONDENSER FAN, MOTOR, AND HOUSING REPAIR.-Continued

TM5-4120-384-14

5-9.

CONDENSER FAN, MOTOR, AND HOUSING REPAIR. - C o n t i n u e d

Figure

5-3.

Motor Assembly, Custom Motor Design,

Model 700-01-0602

(2) To replace overload (thermal) protectors: Overload

If testing (para

protectors are not replaceable on this motor.

35) indicates an open overload protector replace motor.

(3)

replace

(a)

Match-mark

stator

and

end

bell

ease

reassembly.

(b)

Remove

four

screws

from

end

bracket.

(c)

Carefully separate end bracket from stator. Using a

brass or plastic bar and hammer tap opposite sides,

top, and bottom in alternating sequence to break end

bracket loose.

Remove the end bracket carefully to avoid damaging

Wires may be left in place if care is taken

wires.

to avoid damaging them.

5-21