STARTING AND OPERATING INSTRUCTIONS FOR COOLING

TM 5-4120-386-14

2-5. STARTING AND OPERATING INSTRUCTIONS FOR COOLING - Continued.

(5) Turn theventilation damper actuator to close the damper door.

(6) Turn the temperature selector switch to WARMER (lowest cooling position

clockwise).

(7) Position compressor circuit breaker to ''ON".

(8) Position thecontrol circuit breaker to''ON".

(9) Position the mode selector switch to VENT, then position the mode

selector switch to COOL. (Allow 30 to 45 sec delay for compressor to begin

operating.)

b. Cooling Operation. After starting theairconditioner forcooling operation, adjust

for amount of air and degree of cooling.

(1) Leave the mode selector switch on COOL.

(2) Adjust the temperature selector switch from WARMER to the degree

of cooling desired. See Table 2-2 for operator control setting.

(3) Set the evaporator fan speed switch to the desired position.

(4) Adjust the evaporator outlet louvers individually to direct the

airflow as desired.

2-6