INSTALLATION. - TM-5-4120-386-140038

TM 5-4120-386-14

4 - 7 . INSTALLATION.

a . General.

(1) Air conditioner is assembled, ready for operation.

( 2 ) It contains full charge of refrigerant and compressor oil.

b. Mounting.

(1) Place the unit on a firm, level surface to permit proper drainage

of water that condenses out of the air.

( 2 ) Position the unit so that the control panel and the condenser and

e v a p o r a t o r louvers are accessible to the operator and to maintenance personnel.

( 3 ) Check that there are no obstructions in front of any air inlet or outlet louvers

or other openings.

( 4 ) The dimensions for base-mounting holes are shown below. The resilient

mounting parts shown in the lower parts of the figure are shipped with the air

conditioner.

( 5 ) Connect a drain line if necessary.

4-3