 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-386-14
5-6. INFORMATION PLATES-Continued.
REMARKS
ACTION
LOCATION/ITEM
Removal-Continued
10. Danger Plate-
Continued
When removing or installing Danger
Plate, be careful not to damage any
components in the junction box com-
partment.
Using a 1/8" diameter drill
c.
remove four rivets (12) from
danger plate (13) and housing.
Remove danger plate (13)
d.
from housing.
Remove front top cover (20).
11. Schematic
a.
Diagram
(See paragraph 4-17.)
b. Using a 1/8" diameter drill,
remove six rivets (5) from
schematic diagram (6) and
front top cover (20).
c. Remove schematic diagram (6)
from front top cover (20).
Remove rear top cover (17).
12. Refrigeration
a.
Diagram
(See paragraph 4-17.)
Using a 1/8" diameter drill
b.
remove six rivets (7) from
refrigeration diagram (8) and
rear top cover (17).
Remove refrigeration diagram (8)
c.
from rear top cover (17).
Repair
Repair of all information plates
a.
is limited to replacement.
Replace damaged information
b.
plates.
Installation
Remove protective paper from
13. Reset High
a.
back of new reset high pressure
Pressure
Decal
decal (14) to expose sticky
surface.
b. Aline reset high pressure decal
(14) to proper position on junc-
tion box (15) and press in place.
5-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals